Skip to content
IBC Denver
Guides / Technical

What IBC reconditioning typically involves

Reconditioned is a word that covers a lot of ground. Here are the steps a used IBC tote typically goes through before resale, and the questions to ask a supplier about each one.

Tell us what you need

Free, no-obligation quote request. Availability depends on partner suppliers.

US ZIP or Canadian postal code

Free, no-obligation quote request. A partner supplier in our network follows up.

“Reconditioned” is not a single standard. Different suppliers use different processes, and the word on a quote does not tell you exactly what was done to a tote. Knowing the usual steps helps you ask better questions. Here is what reconditioning typically involves, in general terms.

Intake and identification

A tote arrives and is checked to confirm it is empty. Many suppliers give each tote an identifier so its records can follow it, and record what it is known to have held. Totes with unknown or incompatible prior contents may be set aside for industrial-only use or recycling.

Draining residue

Even an “empty” tote holds some residual liquid in the bottle and the valve cavity. That residue is drained and should be disposed of according to what it is. Ask how residues are handled if the prior contents were chemicals.

Washing

Washing usually starts with a rinse or pressure wash to remove loose material, followed by a wash with hot water and a cleaning solution suited to the prior contents. Temperature, contact time and the cleaning chemistry all matter, and too-aggressive chemistry can damage the HDPE. Washing is followed by rinsing to remove cleaning-solution residue.

Sanitizing (when the next use calls for it)

Some suppliers add a sanitizing step for totes intended for more sensitive uses. Whether a tote is suitable for food or any regulated contents is a question to settle directly with the supplier and against current regulations for your product. Do not assume it from the word “reconditioned.”

Leak check

A common method is to fill the tote with water and watch the valve, fill opening, bottle seams and corners for weeping. Ask what leak check a supplier uses and whether results are recorded.

Inspection and parts replacement

The cage, pallet, valve and caps are inspected. Worn valves, gaskets, caps or pallets can be replaced. A bottle that is cracked, stained or contaminated can sometimes be swapped for a new one inside the existing cage, which is usually called rebottling.

Documentation

Some suppliers provide records with each tote, such as known prior contents and what was done to it. If documentation matters for your use, ask for it before you order and confirm what will actually come with the tote.

What reconditioning is not

It does not undo chemicals absorbed into the HDPE wall, which is why prior contents matter so much. It is not sterilization. And it is not automatically approval for food, pharmaceutical or hazardous-materials use. For those, ask the supplier exactly what the tote is suitable for and check current regulations for your product.

General information only. Confirm suitability for your product with the supplier and against current regulations.

More from Technical

← Back to all guides